Flame Flux Heating System For Hot Dip Galvanizing Line / Zinc Kettle

fluxing solution heating of hot dip galvanizing line , Flame Flux Heating System

If the flux has only normal temperature, Zncl2 and HN4CL attachment will be slowly, and the flux is not easy to be dry on the working piece, resulting in the zinc explosion when the working pieces get into the zinc tank.

Burning tail gas heat recycling system without extra heating source, by heat exchanger to keep the temperature 60~70 °, the density of Zncl2, NH4CL reduced considerably, and also increased the uniformity of Zncl2, NH4CL attachment on the working piece, and the zinc layer will be more uniformly and good galvanization result.

How to choose the suitable ventilators

• We calculate the require airflow per hour according to the number of people, the size of the room and the amount of fresh air per hour and than choose the suitable fresh air ventilator.

1. Materials of your parenting parts (to-be-brazed parts).

2. Heating methods. (eg. flame, induction, vacuum furnace etc. )

3. Atmosphere of application. (eg. room air, protective inert gas, reductive gas, vacuum, etc.)

4. Dimensions of your parts. Photos or graphs are preferred. (Different dimensions require different procedures.)

5. Current solution. (eg. brazing materials, equipment, procedures, etc.)

6. The reasons of searching new solution. (eg. price, strength, applicability, etc.)

7. Industry of your application. (Help us refer to similar examples.)

nstallation environments of fresh air ventilation system with heat recovery

• 1.Keep away from the rest area
• 2.Prevent from exposuring and raining
• 3.Duct layout is reasonable

Features of ventilators

• Heat Exchange Ventilation System brings in fresh air through three-layer air filters. The three filtrations of indoor and outdoor airflow can ensure air quality of H13 level